Beyond Set

Key Features of the Dakine Cool Tool Snowboard Tool:

• 6 piece ratchet driver
• #2 and #3 Phillips, #3 posidrive, 3/32" hex, 3/16 and 1/4" flat head, 6mm, 8mm, 10mm, and 11mm wrench

Booster Snowboard shovels are for the riders with minimalist tendencies. A single, non-adjustable shaft with a simple T-handle reduces weight while delivering all the necessary leverage. A stout aluminum blade knifes through cement-like avalanche debris. Did we mention it's great for making jumps?

The Dakine Micro Snowboard/Ski Lock. Compact 3-digit combination lock with 30" [ 76 cm ] retractable cable, Set your own combination

Key Features of the Flow Strap Stash Hi-Back Pack:

• Mini backpack for your snowboard binding's hi-back!
• 450D Polyester
• Release buckle straps
• Zippered "Stash" pocket

Dakine uses only the finest peel and stick adhesives to ensure easy installation and secure attachment. please read and follow the instructions for best results.
For Optimum Bonding:
1. Board and stomp pad should be at room temperature, 70 F
2. Clean surface with rubbing alcohol. Surface must remain clean, smooth and dry. Do not touch.
3. Use a blow dryer on high to heat up the prepared board surface as well as the adhesive on the traction device
4. Immediately after heating, place the traction device and press firmly. Stand on the traction without twisting, the more weight the better.
5. Allow the adhesive to cure at room temperature for 24 hours